How do I operate the servo press?

1) In parameter setting state, press the two buttons of the servo compressor with both hands, and the pressure head will slide slowly. When any button is released, the pressure head will be saved in the current position. Press again and the pressure head will continue to slide. When both buttons are released at the same time, the pressure head slowly slides back to its original position.

2) In the running state, as the trigger signal of equipment start-up, in order to ensure safety and suitable for different production requirements, the servo compressor start-up mode is divided into the following four:

A: Two-handed trigger start. In order to ensure the personal safety of the operator, the electronic press is set to two-handed trigger start mode under the working environment with grating protection. Press the start button with both hands at the same time within 1 second, the electronic press will automatically start and complete A working cycle.

B: continue to start with your hands, and in order to ensure the personal safety of operator, work environment, there is no protection plus grating sets the electronic press to continue to boot mode, hands in hands 1 second time long press the start button and press the button at the same time, until he finished a work cycle, if the electronic pressure release any button in the installation process stops at the current location, and call the police. C: single cycle pressing mode; A, B start mode, each start equipment to complete A working cycle, this mode is suitable for parts of the press assembly connection;

D: reciprocating cycle test mode; To use this mode, it is necessary to turn off the function of B startup mode. In this mode, press the left button to start and complete the same pressing process reciprocally, and press the right button to complete the cycle pressing operation. This mode is suitable for product fatigue test;

3) In the pressure calibration mode, press the left button of the servo compressor to inch downward, and press the right button to inch upward

Emergency stop: it can be used as emergency stop in any state. In case of an emergency, press the emergency stop button and the device will be in the suspended state. The device cannot enter the next action.